Friday, February 15, 2019

Anta Kori Update

I haven't been following Regulus to closely for the last 6 months, but I decided to compile the new drilling data (link and link) and see what they have been finding, and how the new drilling may impact the overall resources for the project.

Background blurb:

The original resource for Anta Kori was done waaaaay back in 2012 for South Legacy, but if you read through it, it is very light-weight, we don’t get any information on:

  • Where the resources are located – not even a simple map
    • Where are the open-pitable resource located?
    • And the underground resource? Where is it, how will they mine it, from the bottom of the pit?
  • No images or sections of the block model showing grade distribution etc.


It is a crap report, a quick and dirty resource calculation. I especially hated the way that they used every metal under the sun to calculate the CuEq grades for the various resource cut-offs.

In essence, it is a crap report.

However, table 14.7 did give a breakdown of the global resources (i.e. not constrained by property boundaries). I wanted to see if I could create a base model from the historic data that could match it, with the idea that I could bring in the recent drilling results and see what happens.

However, I have a big problem:



Look at this table in detail, start with the first row. Write out the total contain metals in full (i.e. including the “0” in the column headings. Do you get:

  • 519,541,000 tonnes or ~520Mt that contain
    • 4,429,000 lbs of copper – just 4.4Mlbs
    • 126,335,000 oz of gold – 126 million ounces of gold 
    • 3,989,155,000 oz of Silver – just under 4 billion ounces of silver
    • 10,598,000 lbs of Moly
    • 572,695,000 lbs of Lead
    • 2,172,276,000 lbs of Zinc


Damn it, Southern Legacy found South America’s largest gold deposit and second largest silver deposit. Who gives a shit about copper with all that lovely gold and silver.

Unfortunately, as I’m an idiot, I decided to try and work out WTF was going on, brought the data into excel and calculated the amount of contained metal for each element (basically took the tonnage and multiplied it by the grade provided).

And you get….



There are some slight differences:

  • ~30% reduction in contained copper (assuming the table was referring to Billions pounds of copper).
  • ~45% increase in gold (I have assumed that they put the contained gold under the contained silver column)
  • Silver, lead and zinc stay the same (assuming that the contained silver was put under the contained gold column)
  • ~80% drop in contained Moly


Generally, very painful news, but the extra couple of million ounces of gold is a nice bonus.

The silly thing is, table 14.5 that splits the resource into Open Pit and underground areas, i.e. the one on Regulus’ website is fine.

WARNING: These guesstimate calculations are complete BS. They are based on grade only, and are designed to give a feel to what Regulus have added to the project.

This is a global guesstimate, I haven't split out mineralization by type, I have assumed everything is the same, which we know is wrong as the high-grade intercepts are restricted to narrow, sub-vertical breccia bodies and veins.

I've included a Leapfrog 3D viewer file here of the various iterations (link)

Notes:
I’ve used the CuEq values, but in the recent drilling these have been calculated from Cu+Au+Ag only, not everything including the kitchen sink as used in the 2012 technical report.
I haven’t factored in mining type, property ownership or recoveries. I’m treating it as a single deposit, calculating the global resources and then clipping it by property boundary to see how much is in Regulus’ concessions..

TAG Guesstimate Global Historic resources



So we get close, I have slightly less tonnes and a slightly smaller CuEq grade (0.48% vs 0.51% from the 2012 technical report).

When we compare the drilling we can see that Regulus have done a lot of work.

Before Regulus:
 

Regulus:

lots more copper intercepts

We see a lot more holes, drilled to much greater depths exploring for the Skarn mineralization that was of secondary interest to Southern Legacy who were mainly focusing on the near surface high-sulfidation gold dominant mineralization.

So, what impact does that have on the project ‘resources’?

 

Potentially a lot.

WARNING: I've assumed that all the mineralization is the same, I haven't separated by skarn vs HS vs breccia vs vein. It will be an over-estimate.

If we clip it by property boundary:



We see that the majority is on Regulus’ concessions. This is biased by the fact that they can’t report the intercepts that do not occur on their concessions. 
However, when we put the global resource figures on the USGS Porphyry Copper chart we see this:



*CuEq figure form the 2012 Technical report, but just using Cu, Au and Ag

If we look at the global resources, the average grade of Anta Kori wasn’t quite good enough. However, if we look at the high-grade (>0.5% CuEq) core of the system, we see that the project changes completely.




It now sits firmly in the ‘good’ area of the chart.

TL:DR version

Regulus have done a lot of work at Anta Kori that should lead to a decent jump up in resources. The key here is to look beyond the overall tonnage to see how much high-grade (>0.5% CuEq) material they have.

An important question to ask or at least think about is - How will Regulus report their upcoming resources? With the agreement with Coimolache allow them to report a global resource or will they only be able to report the mineralization that occurs on their concessions?
An Observation
On the plan map that accompanies the last PR we see hole AK30 sitting way out to the NW all on its own. Why did Regulus drill such an anti-social hole?





If we look a bit closer we see that the hole starts on Coimolache ground, suggesting that Regulus are still working with the Coimolache permits. This may mean that they still haven’t been granted their own permits to drill in that area.



It looks like the hole is testing the contact between the limestones and porphyry, but without a decent surface geology map to help, it is hard to know why they have been drilling ~500m to the NW of the known mineralization. It is a low risk hole, if it gets something, then they’ll have expanded the footprint significantly, but if it gets nothing, no-one will really care.

10 comments:

  1. Thank you for the article.
    Could you explain if the global resource and grade comparison is mixed with both underground and open pit mines?

    I mean this image:

    http://4.bp.blogspot.com/-QvCuzoC3w9w/XGYM3yUo7rI/AAAAAAAADxs/grGYb4L_6aAdtPzYa_hHeEcgCDGlySLUQCK4BGAYYCw/s1600/AK%2Blocation.JPG

    If it does, how can we make something out of it, do we need to assume that 0.5 CuEq can be enough to be mined from an UG operation?

    ReplyDelete
  2. Hello El,

    I'm not splitting out underground and open pit resources. I think that we need to treat the deposit as a single entity, as I think that Coimolache will buy Regulus to control all of the deposit and mine it by an open pit.

    The pink 0.5% CuEq TAG BS resource star on the chart is to make people look beyond the overall tonnes for the deposit and focus on the higher-grade core to see if it is big enough to entice the take out of Regulus.

    Basically I'm saying that we need to look at the >0.5% CuEq cut-off to see if the open pit resources are good enough. For underground we'll probably need >0.7%CuEq

    ReplyDelete
  3. I agree that the 2012 report was brief to the point of non compliance. Some of the assumptions are pie in the sky at best....90% recovery on all metals??? One item I noted...the deposit has high arsenic and antimony, which restricts who will treat it.

    I wonder why they haven't drilled several of the targets, including the possible porphyry to the NW. Also, it would be great to see past drill results on the open pit next door. This pit appears to be part of a leach operation, which makes me ask the question...what percent of the CuT is oxide? No mention of oxide in the tech report. Also....If any, how deep does the oxide extend? And is there a supergene zone?

    The corporate game plan appears to be exploration/development/sell. The logical buyer would be the guys to the South, and their reserves are rapidly dwindling, which puts pressure on them to do a deal.

    Looking forward to seeing Regulus' updated technical report.

    ReplyDelete
  4. Bill, in one word: Permits. They are partly drilling with CMC's Mine permit at the moment (hence the undercutting of the REG targets). The application is running with a rough guidance of permit approval by mid 19.

    REG hasn't encountered any Oxide, only sulfides. CMC is ofcourse looking for more Oxide, it has found some more areas through the years but that seems to have stopped as they encountered the HS Sulfides underneath the current pit (LOM +-6years). They are some indications (Annual report notes etc) that CMC is preparing an updated RE in parallel with REG

    ReplyDelete
  5. I always enjoy reading your take. Well done Angry G.

    ReplyDelete
  6. https://globenewswire.com/news-release/2019/03/01/1745593/0/en/Regulus-Reports-Substantial-Increase-in-Resource-Estimate-at-Antakori-Copper-Gold-Project-Peru.html

    On first look, they pegged the higher 0.5% cutoff with 296Mt of 0.92% CuEq. So quite a bit of improvement even over the TAG OBRC. Shares ran up a bit ahead of time, will be interesting to see next week's reaction. It looks pretty good to me but Mr. Market is a free thinker with sometimes very unusual idea.

    ReplyDelete
    Replies
    1. When I used the 0.3CuEq cut-off I was close on the tonnes, but way under on grade (511Mt @ 0.58% CuEq).

      I'll re-run my numbers using the CuEq calculation in the resource press release, as they may be using different ratios than were used when announcing the drill results (a 5 year trailing average vs discounted spot).

      Delete
    2. I also liked how they didn't split the resource into open-pit and underground mineralization.

      Regulus are stating the obvious, for this project to be successful, it needs to be consolidated (i.e. them getting bought out or forming a JV) into a single entity.

      Delete
    3. Yes I failed to mention how close you got on the tonnnage, that is really excellent work AG! Please don't let the trolls discourage you, we need to have EXCELLENT independent work like you provide available to the public!!!

      I do want to correct one thing, which is that the mineral resources being reported are actually constrained in a pit shell albeit one that lays back on the adjacent property. This would have to clearly be a "superpit", but I don't think they are including any resource that is outside a potential pit with 45 degree slopes with lay backs. There might be some nitpicks with that approach for sure but I think it is still somewhat comparable with other resource estimates that are prepared with some pit constraints applied (in other words, might be a bit aggressive especially on the deeper mineralization but not ridiculously so).

      Delete